BILLET CHOKE PUSH BUTTON, REPLACES STOCK ATTACHMENT FOR CLUTCH CABLE. SLIDES ON AND IS SECURED WITH A STAINLESS SET SCREW.

****DUE TO SIZE, IF YOU ONLY ORDER THIS ITEM YOUR SHIPPING CHARGES MAY COME UP HIGH DUE TO UPS FIGURES. ON ITEMS SMALL LIKE THIS WE USE USPS, IF THERE IS A SHIPPING OVERAGE CHARGE WE WILL REFUND THE DIFFERENCE

BILLET COVER PLATE FOR THE SHIFT INDICATOR. DUE TO THE HEAT AND THE MATERIAL USED FOR THE AFTERMARKET SHIFT INDICATOR, THE MATERIAL TENDS TO BUCKLE OVER TIME. USING THIS BILLET COVER PLATE REINFORCES THE CONTACT AREA AND IS PROVIDED WITH 3 STAINLESS ALLEN BOLTS TO SECURE.
*BILLET PLATE AND 3 BOLTS INCLUDED.

****DUE TO SIZE, IF YOU ONLY ORDER THIS ITEM YOUR SHIPPING CHARGES MAY COME UP HIGH DUE TO UPS FIGURES. ON ITEMS SMALL LIKE THIS WE USE USPS, IF THERE IS A SHIPPING OVERAGE CHARGE WE WILL REFUND THE DIFFERENCE

K&N Oil Filter, multiple applications. Replacement for stock OEM FJ1100/1200 XJR 1200/1250

BLACK ANODIZED BILLET OIL FILL CAP, 7/8' HEX TOP. COARSE THREAD ONLY FOR EARLIER MODEL FJ1200 COVERS. COMES WITH O-RING

SET OF ALUMINUM MOTOR MOUNT SPACERS FOR THE LEFT SIDE ENGINE MOUNT.


MEASUREMENTS: 1.5" LONG, 1.095 O.D., 1/2" I.D.

RRC Logo Front and Back, Yooper Shirts, Unisex, 60/40 Blend, Comfortable Lightweight Shirts, 3 Colors to choose from Black, Royal Blue, Navy

CRANKCASE BREATHER, WASHABLE
FLANGE ID .5"
OUTER DIAMETER 2"
FILTER HEIGHT 1.5"

RRC BILLET HEAT SHIELD BRACKET FOR INTAKE MANIFOLD
FJ1100/1200 XJR1200/1250

REPLACES THE STOCK OEM BRACKET THAT IS NO LONGER IN PRODUCTION OR AVAILABLE

SOLD INDIVIDUALLY

SAME MOUNTING AND POSITIONING AS OEM, UTILIZES 1/4-20 THREADS IN PLACE OF THE STOCK RUBBER GROMMETS FOR MOUNTING THE STOCK OR AFTERMARKET HEAT SHIELD.

INEX APPROVED

Made exclusively for RRC, replacing the the stock Main Seal ours is constructed to withstand the heat and is a Double Lip Construction to keep debris out while running with the ignition cover off. This seal will stop all your leaks you experience with the stock main seal.

Replaces Yamaha 36Y-15389-09-00

RRC DESIGNED FOR SETTING THE AIR GAP BETWEEN THE ROTOR BUTTON AND THE TRIGGERS. QUICK AND EASY BILLET DESIGN, SLIDES OVER THE ROTOR BUTTON, SET YOUR TIMING, TIGHTEN DOWN THE BACKING PLATE AND REMOVE THE TOOL.  WATCH OUR VIDEO ON SETTING YOUR TIMING AND UTLIZING THE RRC AIR GAP TOOL.

REPLACEMENT THROTTLE CABLE FOR YAMAHA FZ-09 as well as the 1200/1250

EXHAUST GASKET SET OF 8. OUR GASKETS SNAP IN AND HOLD IN PLACE. FITS Yamaha FJ1100-1200, XJ1200 and XJR1300

RRC BILLET -6AN FUEL TEE EASILY REPLACE THE STOCK FUEL INLET FOR A FAST, SAFE AND SECURE CONNECTION. NO MORE UNSIGHTLY HOSE CLAMPS. MEASURES JUST OVER 2" IN OVERALL LENGTH FOR EASY CONNECTIVITY WITH ANY -6 AN FITTING. INEX APPROVED FOR RRC, QUICK AND EASY SELF INSTALLATION. COMES WITH 4 O-RINGS

Replaces stock shift shaft boss. This is designed to strengthen and support the boss area with extended threads and the one piece backing plate. A must for Road Racing!

RRC EXCLUSIVE BILLET LOCK FOR K&N RC SERIES 3510 HIGH FLOW AIR FILTERS. ELIMINATES THE NEED TO ZIP TIE THE AIR FILTERS ON, THIS LIGHTWEIGHT BILLET LOCK IS SLOTTED AT THE MOUNTING POINT FOR ADJUSTMENT. COMES AS A SET OF (2) WITH STAINLESS CARB ALLENS (4).

SET OF 4 PLUG WIRES AS SHOWN WITH 45 DEGREE BOOTS.

CUSTOM MADE SET OF 4 PLUG WIRES AS SHOWN WITH 45 DEGREE BOOTS. THESE WIRES ARE MADE TO FIT EXACTLY LIKE SHOWN IN THE PICTURE...TO WORK WITH RRC HEAT SHIELD (OR REPLICAS) WITH COILS MOUNTED FACING EACH OTHER.

*PERFECT FIT FOR RRC TOP END FAN CLEARENCE

1 GALLON OF SCHAEFFER'S 15W40 SUPREME 7000 SYNTHETIC RACING OIL. BATTLE TESTED AND RRC APPROVED TO PROTECT AGAINST EXCESSIVE WEAR AND HEAT. WITH THE HIGH ZINC CONTENT AND RESISTANCE TO THERMAL BREAKDOWN THIS IS A SUPERIOR OIL FOR THE COST.

The NEW RU-3510 is the replacement for the Chrome Backed filter which is no longer produced.

K&N Universal Clamp-On Air Filter: High Performance, Premium, Washable, Replacement Filter: Flange Diameter: 2.125 In, Filter Height: 3 In, Flange Length: 0.375 In, Type: Oval, RU-3510

REPLACEMENT SCOOP FOR THE SALDANA & FLUIDYNE LEGENDS ASPHALT OIL COOLER

ORIGINAL RRC PRODUCT, BLACK POWDER COAT ALUMINUM HEAT SHIELD. SLOTTED HOLES ON TOP FOR COIL MOUNTING, DEFLECTORS TO DIRECT COOL AIR AROUND THE CYLINDER HEAD. INSTALLS IN SECONDS.

Shift Indicator Engine Pigtail, for Yamaha FJ/XJR 1200/1250, complete with aluminum cover plate, O-Ring, and stainless bolts. This will work with the USLC Digital Dash Gauge for the 1200/1250 as well.

***If Shipping charges are incorrect we will refund the difference

Shift Indicator Dash Gauge ONLY, Blue LED display1-5 gears and "0" for Neutral Fits Yamaha FJ/XJR 1200/1250. This will work with the USLC Engine Pigtail, as well as our RRC Engine Pigtail. For Complete Kit see other Item Listed

***If Shipping charges are incorrect we will refund the difference

#1 SELLING JET KIT--OUR HSR JET KIT COMES WITH 2 DIFFERENT COMPLETE SETS OF (4) MAIN JETS FOR WEATHER IN YOUR REGION, SET OF... 4 PILOT JETS, 4 AIR JETS, 4 TITANIUM NEEDLES, 4 DYNA SLIDE SPRINGS, 16 STAINLESS CARB TOP ALLEN BOLTS,  QUICK AND EASY TO SELF INSTALL, COMPLETE PACKAGED KIT ALSO COMES WITH A JETTING CHART AND INSTRUCTIONS.

RRC Valve Shim Kit Includes:
22 Total Shims from 260-285, 2 of each size including half sizes and Shim Tool
2-260
2-262
2-265
2-268
2-270
2-272
2-275
2-278
2-280
2-282
2-285
Shim Tool included with Case

***If you would like different shims you may substitute sizes. Specifiy in the notes section when you place your order if you need to make any changes

RRC SIGNATURE REMOTE HOUSING KIT, MOUNTS DIRECTLY TO THE MOTOR ON THE EXHAUST SIDE OF MOTOR USING 2 STUDS PROVIDED. 2 INLETS WITH 1 TOP EXIT, 1/8 NPT THREAD FOR OPTIONAL OIL PRESSURE FITTING. BILLET ALUMINUM, BLACK ANODIZED. BMRS RACING SOLUTIONS LINE KIT INCLUDED, ALSO K&N PAPER OIL FILTER
UTILIZES STOCK OIL FILTER CANISTER NOT INCLUDED, STAINLESS FILTER NO LONGER USED, COMES WITH K&N PAPER OIL FILTER.

***WHEN AVAILABLE, LOOK FOR QUANITY IN STOCK

Refurbished Set of Stock Yamaha Carburetors with one of our 3 approved Jet Kits installed (HSR, DYNA, or Factory Pro Needles, main jets, pilot jets, air jet, springs, stainless screws) for your location of racing. Digitally Synchronized and Dyno Tested, Race Ready.

(Specify if your looking for a particular Jet Kit out of the 3 listed)

SALDANA OIL COOLER WITH SCOOP. Newly redesigned for Increased Flow, Larger Core, and Extended Tanks. This cooler also features a Howe Cooling Tube for the Top End Oiler. AN -8 fittings for Inlet/Outlet Main Cooler and AN-4 fittings Inlet/Outlet for Howe Tube. Kit includes Oil Cooler w/ Howe Top End Cooler, Front Air Scoop with Left/Right mounting brackets.

Mounting Brackets on the backside to Accommodate up to 2 SPAL Puller Fans.
Fans can be ordered separate

ACCESORIES:
BMRS LINE KIT available from the RRC remote to cooler, and cooler to the back of the motor. Products LINE-3FBM & LINE-4FBM

****This Cooler will work with existing Fluidyne Oil Cooler Scoops. Same mounting brackets as well. All interchangeable

This is a New Item, Backorders are accepted as we have more in process. Once ordered we will give you an ETA if it shows we are out of stock